Scanlife for more info. Scanlife for more info. Price including:
BMS with case
All wires(balancing wires for 24s,4 channels temp.throttle/key wires)
2.42inch OLED with turn-page switch(1m)
USB-USB Cable
Current sensor(+-200A)
PC-software
The programmable E-Bike Smart BMS (EBS-BMS.24S) applies to superpower E-bike or E-motor which are equipped with l Li-ion
battery packs using less than 24 cells in series (≤24s and any number of parallel cells).
The EBS-BMS uses Linear Technologies battery management chip LTC6803-
3, and microprocessor to achieve high accuracy, stability and safety.
· supports 12-24s Li-ion battery pack,max 100V
· controls max. 30A charging current, no limit discharging current
· controls E-bike electric lock (e-lock for short below), control E-bike throttle
· balances passively max 23 cells simultaneously at max. 200mA bleeding current
· monitors max. 4 external temperatures and 1 internal temperature
· monitors charging current with built-in sensor (+-50A) and discharging current with external sensor (+-200A/400A)
· supports 2.8inch LCD display
· includes professional PC software for parameter setting via TTL-USB adaptor cable
The BMS does:
· monitor all cell voltages V_cell
· monitor the battery pack current I_bat
· monitor battery pack and BMS temperature T_pack(4 channels) and T_sys(1 channel)
· SOC automatically learning and calculation
depending on the parameter settings the BMS will:
· detect and handle alarming situations (OV, UV, OC, UT, OT) by disconnecting e-lock/throttle or charger
· detect and handle charge and discharge limits of the battery pack
· detect unbalanced cells and control bleeding
|
| EBS-BMS.24S (Smart BMS for E-bike Throttle Control) |
| battery pack configuration | 12-24s |
| DCHG current handling capacity | nominal: no limit (choose appropriate CS) |
| CHG current handling capacity | max continuous: 30A |
| supply voltage | 10V-100V for 4-24s |
| passive cell balancing | 200mA, max 23 cells simultaneously |
| SOC (calculated) | accuracy ±2.5% over one cycle |
| V_cell measurement | resolution 5mV, accuracy ±0.2% |
| current measurement Current sensor(short for CS) | Internal CS for charging,+-50A ±2.0% |
| external CS for discharging, ±100 - 600A ±2.0% | |
| supply current | 20mA normal(e-lock is on) 0mA standby(e-lock is off) |
| communication | TTL-USB for PC and LCD |
| throttle control | PWM 5kHz, for clamping Hall element throttle signals 1-4V |
| auxiliary control | UV and OV control signal (opto coupled open collector) |
About supply current
· when customers turn off key,BMS will also be turned off and no power consumption any more
· When charger on, BMS will be aumatically on and begin manage charging.(not all the chargers.Foundingpower chargers will be OK.)
Package:
