Supported features
Pulse input function (can be connected to the encoder A. B phase input corresponding to the counter C251)
Program, parameter, annotation writing function
Procedures, parameters, comments read function
Procedures, parameters, comments of the validation function
Computer monitoring (easy to debug)
Device batch function
Device landing function
Device test function
Clear the memory function
Connection text function (baud rate 9600, data bit 7, parity bit, even parity (even), stop bit 1)
Connect the touch screen function (baud rate 9600, data bit 7, parity bit, even parity (even), stop bit 1)
Power-down hold function
2. This product currently supports the command set of special devices:
M8000 (operation monitoring contact), M8001 (operation monitoring reverse contact).
M8002 (initializing pulse contact), M8003 (initializing pulse counter contact).
M8004 (error indication contact).
M8011 (10 milliseconds clock pulse), M8012 (100 millisecond clock pulse), M8013 (1 second clock pulse), M8014 (1 minute clock pulse).
M8020 (zero flag), M8021 (borrow flag), M8022 (carry flag).
M8029 (Instruction execution end flag).
M8033 (memory hold contact).
M8034 (output contact prohibited).
More reference FX1N series.
Basic instructions: LD, LDI, AND, ANI, OR, ORI, OUT, (OUTT, OUTC), SET, RST, ANB, ORB, MPS, MRD,
MPP, INV, LDP, LDF, ANDP, ANDF, ORP, ORF, RET, OUTM, SETM, RSTM, OUTS, SETS,
RSTS, PLS, PLF, MC, MCR, PI, END
Stepping instruction: STL: Supports up to 8 parallel branches, different state number can have double coil.
LD =>, LD <=, LD <=, LD>, LD <, LD <>, LD =, AND> =, AND <=, AND>, AND <, AND <>, AND =, OR> =, OR <=, OR>, OR <, OR <>, OR =.
Transmission and comparison instructions: MOV, CML, XCH, BCD, BIN, CMP, ZCP, FMOV.SMOV.BMOV.
Four arithmetic instructions: ADD, SUB, MUL, DIV, INC, DEC, WAND, WOR, WXOR, NEG.
Cyclic shift instructions: SFTR, SFTL, SFWR, SFRD.
Data processing instructions: ZRST, DECO, ENCO.
Program flow instructions: CJ, CALL, SRET, IRET, EI, DI, FEND, WDT, FOR, NEXT.
Convenient instruction: IST, ABSD, INCD, ALT, RAMP,
High-speed processing instructions: REF, REFF, MTR, HSCS, HSCR, SPD, PLSY, PWM, PLSR (two pulse output, Y0, Y1 mouth).
Peripheral I / O port: DSW, SEGL, FROM, TO.
Peripheral SER instruction: RS, PRUN, ASCI, HEX, CCD, VRRD, VRSC, PID.
Positioning instructions: ABS, ZRN, PLSV, DRVI, DRVA.
Clock operation: TCMP, TZCP, TADD, TSUB, TRD, TWR, HOUR.
Supports 32-bit instructions!
Device to maintain the scope of power-down, the application refers to the Mitsubishi FX1N compatible,
Special devices:
M8000 (operation monitoring contact), M8001 (operation monitoring reverse contact).
M8002 (initializing pulse contact), M8003 (initializing pulse counter contact).
M8004 (error indication contact).
M8011 (10 milliseconds clock pulse), M8012 (100 millisecond clock pulse), M8013 (1 second clock pulse), M8014 (1 minute clock pulse).
M8020 (zero flag), M8021 (borrow flag), M8022 (carry flag).
M8029 (Instruction execution end flag).
M8033 (memory hold contact).
M8034 (output contact prohibited).
M8200-M8203 (Counting direction of the C200-C203).
M8235 (counting direction of C235).
D8000 (monitor timer setting value).
D8012 (maximum scan time).
D8140 (Y0 pulse output count register)
D8142 (Y1 pulse output count register)
Maximum memory capacity: 8000 steps!
