FrostbiteGlacier-256: 1 PCS(Frostbite*1 PCS+Glacier*1 PCS -256mm)

FrostbiteGlacier-256: 2 PCS(Frostbite*2 PCS+Glacier*2 PCS -256mm)

Why CryoGrip Pro Glacier?

Which plate is right for you?

Frostbite

Surface Finishes:Rough Texture Better Grip

G.S.I*:10

Cold Print Material Compatibility:Compatible only with PLA and PETG, offering extremely good cold printing adhesion.PLA 30-50°C,PETG 50-70°C

Engineering Material Compatibility:Not compatible with materials besides PLA & PETG.

Use Case Scenario Recommendations:Dedicated Plate to print PLA & PETG Only
Other Features:AR Code printed

Cleaning Methods:Water and Soap Only


Glacier

Surface Finishes:Smooth Texture

G.S.I*:8

Cold Print Material Compatibility:Excels with most engineering materials, with good cool printing adhesion, but not as good as Frostbite with PLA and PETG.PLA 45-55°C,PETG 60-75°C

Engineering Material Compatibility:Compatible with All materials with nozzle

temperatures below 300°C

Use Case Scenario Recommendations:

Other Features:AR Code sticker,Heat-isolating Handle

Cleaning Methods:Water and Soap,Alcohol

*Grip Strength Index---Refer to the Material Comaptibility Chart for more details.

Revolutionary 7 - Layer Design Achieve Superior Print Stability

1 Base Plate

580HV Hardness, highly ferromagnetic spring steel with strong magnetic holding to physically constrain your print from warping. No more worrying about the edge of the build plate lifting during large prints.

2,5 Base Coat

Ultra-strong bonding agent ensures excellent adhesion between the top coat and spring steel, with zero risk of peeling even after repeated bending.

3,6 Intermediate Coating

Impact-resistant, corrosion-resistant, and long-lasting with no risk of damage from nozzle probing.

4,7 Top Coat

Porous Oleophobic Polymer Coating - Attracts filament at the molecular level for ultra-strong adhesion, eliminating print failures due to detachment. Achieve 100% adhesion without heating, using half the energy.

Self-Cleaning Property - Reduces the negative impact of accidental fingerprints on adhesion performance.

Superior Adhesion,
Minimal Heat Required

CryoGrip Pro Glacier provides superior adhesion for PLA & PETG at lower bed
temperatures, significantly minimizing warping in large prints. When printing at high
temperatures, it greatly improves adhesion for engineering filaments like PA-CF. With

excellent heat resistance, it's compatible with various filament and offers
long-lasting durability.

Scratch-Resistant & Self-Recovering for Ultimate Durability

A simple wipe restores its adhesion.

*You can use water and soap, or alcohol, to clean the plate.

Zero Wait: Instant Plate Removal Post-Print

The sleek honeycomb handle design isolates heat from the print area. At a 100°C

heatbed temperature, the temperature in the handle area remains low enough to

touch, enabling immediate print removal without cooldown. Keep your projects

moving smoothly.

Effortless Print Removal Bend and Pop!

The CryoGrip Pro series provides excellent adhesion while still allowing prints to be easily removed by bending the plate. For larger or more intricate prints, use a

scraper to gently lift the edges, then pry them off carefully. If a print sticks too firmly, place the plate in a freezer for 10 minutes to assist with removal.

Find Your Compatible Model

The CryoGrip Pro Glacier offers warp-free printing of PLA & PETG at lower
temperatures. This allows you to keep the auxiliary fan on and eliminate concerns
about drafts affecting your prints, even in open models like the P1P and A1.

AR Code Sticker

Includes a sheet of AR code stickers, made of Hi-Temp base material. Choose your own AR code according to the material that you print most often.

Installation Steps

Step 1: Align the plate with the fixed points (highlighted in red) on the platform.Either side can face up.

Step 2: Lower the plate onto the magnetic platform and secure it in place.

Why CryoGrip Pro Frostbite?

Panda Build Plate/CryoGrip/CryoGrip Pro Frostbite

Unmatched Adhesion, Zero Heat

CryoGrip Pro Frostbite delivers unparalleled adhesion for PLA and PETG at room temperature, reducing warping of large prints and remaining scratch and wear-resistant over long periods of time.

Scratch-Resistant & Self-Recovering for Ultimate Durability

A simple wipe restores its adhesion.

*Please use water + soap only to clean the plate. Do not use solvents(e.g., alcohol) as these may cause permanent surface damage.


Cool and Clog Free

Uniquely designed to print PLA at low temperature, the CryoGrip Pro Frostbite prevents your filament from softening and slipping in the extruder due to high chamber temperatures.


Pandas Love Bamboo

Compatible with Bambu Lab H2D,P1P, P1S, X1C, X1E and A1 printers, the CryoGrip Pro Frostbite offers warp-free printing of PLA & PETG at room temperature. This allows you to keep the auxiliary fan on and eliminate concerns about drafts affecting your prints, even in open models like the P1P and A1.


Intricate Markings AR Code for Bed Detection

An AR code is included on the build plate to ensure it is recognized by the XIC, eliminating setup errors for a hassle-free printing experience.

*When using the CryoGrip Pro Frostbite build plate with your H2D printer, please ensure the"Build Plate Detection" feature is disabled in your slicing software.

Why CryoGrip?

CryoGrip Coating Breakthrough Technology

Discover the CryoGrip Buildplate — a technological breakthrough in 3D printing adhesion. Developed from a unique polymer, this build plate leads the market with unmatched stability and results, surpassing traditional PEI solutions.

Unmatched Adhesion, Zero Heat

Experience unparalleled first-layer adhesion with our CryoGrip BuildPlate,engineered to secure your prints firmly at room temperature. Enjoy flawless printing results with no warping.

Zero Heat,Zero Clogs

Uniquely designed to print PLA at ambient temperatures, the CryoGrip Build Plate effectively prevents clogs caused by extruder overheating.

Effortless Print Removal Bend and Pop!

Simply bend the surface slightly, and your finished print detaches cleanly without the need for scraping or prying tools.

Pandas Love Bamboo

Compatible with Bambu Lab P1P, P1S, XIC, and A1 printers, the CryoGrip Buildplate ensures warp-free printing of various filaments at room temperatures. This allows you to keep the auxiliary fan on and eliminate concerns about drafts affecting your prints, even in open models like the P1P and A1.

Specifications

Dimensions：256mm x 256mm

Compatibility：For Bambu Lab P1P,P1S,X1C,A1


Why PANDA BUILDPLATE？

Explore Your Ideal Texture

Superior Durability and Heat Resistance

The Panda BuildPlate is engineered with exceptional durability and heat resistance, ensuring long-lasting performance and consistent results.


PEI Suggested Filaments：PLA, PETG, TPU, ABS, ASA, PVA, PET, PA, PC, Nylon, Nylon-CF

PET CF/PEO Suggested Filaments：PLA, PETG, TPU

PEI Suggested Bed Temp：PLA/TPU: 50-60℃、PETG: 70-80℃、ABS: 80-100℃

PET CF/PEO Suggested Bed Temp：PLA/TPU: 50-70℃、PETG: 70-80℃

*Optimize your printing results by choosing the appropriate surface textures based on the different filament.

Specifications

Dimensions：256mm x 256mm

Compatibility：For Bambu Lab P1P,P1S,X1C,A1